Password Management Commands 1507no passwords historyDefault ConfigurationThe default value is 0.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.ExampleThe following example sets the number of previous passwords remembered bythe system at 10.console(config)#passwords history 10passwords lock-outUse the passwords lock-out command in Global Configuration mode tostrengthen the security of the switch by locking user accounts that have failedlogin due to wrong passwords. When a lockout count is configured, a userwho is logging in must enter the correct password within that count.Otherwise that user is locked out from further switch access. Only a user withread/write access can reactivate a locked user account. Password lockout doesnot apply to logins from the serial console. Use the no form of this commandto set the password lockout count to the default value.Syntaxpasswords lock-out1-5no passwords lock-outDefault ConfigurationThe default value is 0 or no lockout count is enforced.
