548 Link Dependency CommandsSyntaxdepends-on {gigabitethernet | port-channel | tengigabitethernet |fortygigabitethernet}intf-listno depends-on {gigabitethernet | port-channel | tengigabitethernet |fortygigabitethernet}intf-list•intf-list — List of ports in unit/slot/port format or port-channel numbers.Separate nonconsecutive items with a comma and no spaces. Use a hyphento designate the range of ports or port-channel numbers. (Range: ValidEthernet interface or port-channel list or range)Default ConfigurationThis command has no default configuration.Command ModeLink Dependency modeUser GuidelinesCircular dependencies are not allowed, i.e. interfaces added to the group maynot also appear in the depends-on list.Examplesconsole(config-linkDep-group-1)#depends-on gigabitethernet 1/0/10console(config-linkDep-group-1)#depends-on port-channel 6show link-dependencyUse the show link-dependency command to show the link dependenciesconfigured for a particular group. If no group is specified, then all theconfigured link-dependency groups are displayed.Syntaxshow link-dependency [group GroupId] [detail]•GroupID—Link dependency group identifier. (Range: Valid Group Id,1–16)• detail—Show detailed information about the state of members and thedependent ports.
