System Management Commands 1697Line SSH.......................... EnableLine Telnet....................... Enable===motd=====show checkpoint statisticsUse the show checkpoint statistics command to display the statistics for thecheckpointing process.Syntaxshow checkpoint statisticsDefault ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesWhen nonstop forwarding is enabled on a stack, the stack's management unitcheckpoints operational data to the backup unit. If the backup unit takes overas the management unit, the control plane on the new management unit usesthe checkpointed data when initializing its state. Checkpoint statistics trackthe amount of data checkpointed from the management unit to the backupunit.Exampleconsole#show checkpoint statisticsMessages Checkpointed.....................6708Bytes Checkpointed........................894305Time Since Counters Cleared...............3d 01:05:09Checkpoint Message Rate...................0.025 msg/secLast 10-second Message Rate...............0 msg/secHighest 10-second Message Rate............8 msg/sec
