1670 System Management Commandsasset-tagUse the asset-tag command in Global Configuration mode to specify theswitch asset tag. To remove the existing asset tag, use the no form of thecommand.Syntaxasset-tag [unit]tagno asset-tag [unit]•unit — Switch number. (Range: 1–12)•tag — The switch asset tag.Default ConfigurationNo asset tag is defined by default.Command ModeGlobal Configuration modeUser GuidelinesThe asset-tag command accepts any printable characters for a tag nameexcept a double quote or question mark. Enclose the string in double quotesto include spaces within the name. The surrounding quotes are not used aspart of the name. The CLI does not filter illegal characters and may acceptentries up to the first illegal character or reject the entry entirely.ExampleThe following example specifies the switch asset tag as 1qwepot. Because theunit parameter is not specified, the command defaults to the master switchnumber.console(config)# asset-tag 1qwepotbanner execUse the banner exec command to set the message that is displayed after asuccessful login. Use the no form of the command to remove the set message.
