IPv6 Access List Commands 505Syntaxipv6 access-list renamename newname•name — the name of an existing IPv6 ACL.•newname — alphanumeric string from 1 to 31 characters uniquelyidentifying the IPv6 access list.Default ConfigurationThere is no default configuration for this command.Command ModeGlobal Configuration modeUser GuidelinesThere are no user guidelines for this command.Exampleconsole(Config)#ipv6 access-list rename DELL_IP6 DELL_IP6_NEW_NAMEipv6 traffic-filterThe ipv6 traffic-filter command either attaches a specific IPv6 AccessControl List (ACL) to an interface or associates it with a VLAN ID in a givendirection.An optional sequence number may be specified to indicate the order of thisaccess list relative to other IPv6 access lists already assigned to this interfaceand direction. A lower number indicates higher precedence order. If asequence number is already in use for this interface and direction, thespecified IPv6 access list replaces the currently attached IPv6 access list usingthat sequence number. If the sequence number is not specified for thiscommand, a sequence number that is one greater than the highest sequencenumber currently in use for this interface and direction is used.Use the “no” form of the command to remove an IPv6 ACL from theinterface(s) in a given direction.
