CDP Interoperability Commands 309Exampleconsole#show isdp neighborsCapability Codes: R - Router, T - Trans Bridge, B - Source Route, S - Switch,H - Host, I - IGMP, r - RepeaterDevice ID Intf Hold Cap. Platform Port ID------------- ----- ---- ---------------Switch1/0/1 165 RI cisco WS-C4948 GigabitEthernet1/1console#show isdp neighbors detailDevice ID SwitchAddress(es):IP Address: 172.20.1.18IP Address: 172.20.1.18Capability Router IGMPPlatform cisco WS-C4948Interface 1/0/1Port ID GigabitEthernet1/1Holdtime 162Advertisement Version 2Entry last changed time 0 days 00:55:20Version :Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M),Version 12.2(25)EWA9, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2007 by Cisco Systems, Inc.Compiled Wed 21-Mar-07 12:20 by tinhuangshow isdp trafficThe show isdp traffic command displays ISDP statistics.Syntaxshow isdp trafficDefault ConfigurationThere is no default configuration for this command.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodes
