IPv6 Routing Commands 1091Syntaxipv6 mld query-intervalquery-intervalno ipv6 mld query-interval•query-interval — Query interval (Range: 1–3600).Default ConfigurationThe default query interval is 125 seconds.Command ModeInterface Configuration (VLAN) mode.User GuidelinesThere are no user guidelines for this command.Exampleconsole(config-if-vlan3)#ipv6 mld query-interval 130ipv6 mld query-max-response-timeThe ipv6 mld query-max-response-time command sets MLD querymaximum response time for the interface. This value is used in assigning themaximum response time in the query messages that are sent on thatinterface. Use the “no” form of this command to set the maximum queryresponse time to the default.Syntaxipv6 mld query-max-response-timequery-max-response-timeno ipv6 mld query-max-response-time•query-max-response-time — Maximum query response time (Range:1–65535 milliseconds).Default ConfigurationThe default query maximum response time is 10 seconds.
