422 Ethernet CFM CommandsUser GuidelinesThis command has no user guidelines.Exampleconsole(config-if-gi1/0/1)# ethernet cfm mip level <7>ping ethernet cfmUse the ping ethernet cfm command in Privileged EXEC mode to generate aloopback message (LBM) from the configured MEP.Syntaxping ethernet cfm {macmac-addr| remote-mpid1-8191} {domaindomainname | level0-7} vlanvlan-id mpid1-8191 [count1-255]• level—Maintenance association level•mac-addr— The destination MAC address for which the connectivity needs tobe verified. Either MEP ID or the MAC address option can be used.• remote-mpid— The MEP ID for which connectivity is to be verified; i.e. thedestination MEP ID.• domain— Name of the maintenance domain (an alphanumeric string of up to43 characters in length).•vlan-id— A VLAN associated with the maintenance domain. Range: 1-4094.• mpid— The MEP ID from which the loopback message needs to betransmitted.• count— The number of LBMs to be transmitted. The default number is 1.Default ConfigurationBy default, this command will transmit one loopback message with a time-outof five seconds.Command ModePrivileged EXEC
