802.1x Commands 873console#show dot1x interface gigabitethernet 1/0/2 statisticsPort......................................... gi1/0/2EAPOL Frames Received.......................... 0EAPOL Frames Transmitted....................... 0EAPOL Start Frames Received.................... 0EAPOL Logoff Frames Received................... 0Last EAPOL Frame Version....................... 0Last EAPOL Frame Source........................ 0000.0000.0000EAP Response/Id Frames Received................ 0EAP Response Frames Received................... 0EAP Request/Id Frames Transmitted.............. 0EAP Request Frames Transmitted................. 0Invalid EAPOL Frames Received.................. 0EAPOL Length Error Frames Received............. 0show dot1x usersUse the show dot1x users command in Privileged EXEC mode to display802.1x authenticated users for the switch.Syntaxshow dot1x users [usernameusername]•username — Supplicant username (Range: 1–160 characters)Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays 802.1x users.console#show dot1x usersPort Username--------- ---------
