Green Ethernet Commands 439Tx Low Power Idle Event Count......... 0Tx Low Power Idle Duration (uSec)......0Tw_sys_tx (usec)..................... 17Tw_sys_tx Echo(usec)................. 17Tw_sys_rx (usec)..................... 17Tw_sys_tx Echo(usec)................. 17Fallback Tw_sys (usec)............... 17Remote Tw_sys_tx (usec).............. 21Remote Tw_sys_tx Echo(usec).......... 21Remote Tw_sys_rx (usec)............... 21Remote Tw_sys_tx Echo(usec).......... 21Remote fallback Tw_sys (usec)........ 21Tx DLL enabled........................ YesTx DLL ready.......................... YesRx DLL enabled........................ YesRx DLL ready.......................... YesCumulative Energy Saving (W * H)............... 2.37Time Since Counters Last Cleared......... 1 day 20 hr 47 min 34 secshow green-modeUse the show green-mode command in Privileged EXEC mode to display thegreen-mode configuration for the whole system. The status is shown only forthe modes supported on the corresponding hardware platform whetherenabled or disabled.Syntaxshow green-modeDefault ConfigurationThis command has no default configuration.Command ModePrivileged EXECUser GuidelinesThis command output provides the following information.
