526 IPv6 MLD Snooping Querier CommandsUser GuidelinesThere are no user guidelines for this command.Exampleconsole(config)#ipv6 mld snooping querier timer expiry 222show ipv6 mld snooping querierUse the show ipv6 mld snooping querier command to display MLDSnooping Querier information. Configured information is displayed whetheror not MLD Snooping Querier is enabled.Syntaxshow ipv6 mld snooping querier [detail | vlanvlan-id]•vlan-id — A valid VLAN ID. (Range: 1 - 4093)Default ConfigurationThere is no default configuration for this command.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesWhen the optional argument vlan vlan-id is not used, the command showsthe following information:Parameter DescriptionMLD Snooping QuerierModeIndicates whether or not MLD Snooping Querier isactive on the switch.Querier Address Shows the IP Address which will be used in the IPv6header while sending out MLD queries.MLD Version Indicates the version of MLD that will be used whilesending out the queries. This is defaulted to MLD v1and it can not be changed.
