856 802.1x Commands•seconds — Number of seconds between re-authentication attempts.(Range: 300–4294967295)Default ConfigurationRe-authentication period is 3600 seconds.Command ModeInterface Configuration (Ethernet) modeUser GuidelinesThis command has no user guidelines.ExampleThe following example sets the number of seconds between re-authenticationattempts to 300.console(config)# interface gigabitethernet 1/0/16console(config-if-Gi1/0/16)# dot1x timeout re-authperiod 300dot1x timeout server-timeoutUse the dot1x timeout server-timeout command in Interface Configurationmode to set the time that the switch waits for a response from theauthentication server. To return to the default setting, use the no form of thiscommand.Syntaxdot1x timeout server-timeoutsecondsno dot1x timeout server-timeout•seconds — Time in seconds that the switch waits for a response from theauthentication server. (Range: 1–65535)Default ConfigurationThe period of time is set to 30 seconds.
