1272 OSPF Commandsshow ip ospf virtual-linkUse the show ip ospf virtual-link command in Privileged EXEC mode todisplay the OSPF Virtual Interface information for a specific area andneighbor or for all.Syntaxshow ip ospf virtual-link [area-id neighbor-id]•area-id — Identifies the OSPF area whose ranges are being displayed.(Range: IP address or decimal from 0–4294967295)•neighbor-id — Identifies the neighbor’s router ID. (Range: Valid IPaddress)Default ConfigurationShow information for all OSPF Virtual Interfaces.Command ModeUser EXEC, Privileged EXEC modes, Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays the OSPF Virtual Interface information forarea 10 and its neighbor.console#show ip ospf virtual-link 10 192.168.2.2Area ID........................................ 10Neighbor Router ID............................. 192.168.2.2Hello Interval................................. 10Dead Interval.................................. 655555Iftransit Delay Interval....................... 1Retransmit Interval............................ 5State.......................................... downMetric......................................... 0Neighbor State................................. downAuthentication Type............................ MD5Authentication Key............................. "test123"
