1074 IP Routing CommandsRIP Routes..................................... 0OSPF Routes.................................... 0Intra Area Routes.............................. 0Inter Area Routes.............................. 0External Type-1 Routes......................... 0External Type-2 Routes......................... 0Total routes................................... 0show ip trafficUse the show ip traffic command in User EXEC mode to display IP statisticalinformation of the software IP stack. Refer to RFC 1213 for more informationabout the fields that are displayed.Syntaxshow ip trafficDefault ConfigurationThis command has no default configuration.Command ModeUser EXEC, Privileged EXEC modes, Configuration mode and allConfiguration submodesUser GuidelinesThis command displays statistics for the software IP stack, not the hardwarerouting information.ExampleThe following example displays IP route preferences.console>show ip trafficIpInReceives................................... 24002IpInHdrErrors.................................. 1IpInAddrErrors................................. 925IpForwDatagrams................................ 0IpInUnknownProtos.............................. 0IpInDiscards................................... 0IpInDelivers................................... 18467IpOutRequests.................................. 295
