IPv6 Routing Commands 1129show ipv6 vlanUse the show ipv6 vlan command in Privileged EXEC mode to display IPv6VLAN routing interface addresses.Syntaxshow ipv6 vlanDefault ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays IPv6 VLAN routing interface addresses.console#show ipv6 vlanMAC Address used by Routing VLANs: 00:02:BC:00:30:68VLAN ID IPv6 Address/Prefix Length------- ---------------------------------------1traceroute ipv6Use the traceroute ipv6 command in Privileged EXEC mode to determinethe path and measure the transit delay to another device in the network. Thetransit delays are measured for each hop in the network.Syntaxtraceroute ipv6 {ipv6-address|hostname} [count1-10] [init-ttl1-255][interval1-60] [max-fail0-255] [max-ttl1-255] [port1-65535] [size0-39936] [source {ipv6-address | loopback0-7 | vlan1-4093}]• ipv6-address | hostname—The target IP address or host to ping.
