IPv6 MLD Snooping Querier Commands 525•interval — Amount of time that the switch waits before sending anothergeneral query. (Range: 1–1800 seconds)Default ConfigurationThe default query interval is 60 seconds.Command ModeGlobal Configuration modeUser GuidelinesThere are no user guidelines for this commandExampleconsole(config)#ipv6 mld snooping querier 120ipv6 mld snooping querier timer expiryUse the ipv6 mld snooping querier timer expiry command to set the MLDQuerier timer expiration period. It is the time period that the switch remainsin Non-Querier mode once it has discovered that there is another MulticastQuerier in the network. Use the no form of this command to reset the timerexpiration period to the default.Syntaxipv6 mld snooping querier timer expirytimeripv6 mld snooping querier timer expiry•timer — The time that the switch remains in Non-Querier mode after ithas discovered that there is a multicast querier in the network. (Range:60–300 seconds)Default ConfigurationThe default timer expiration period is 60 seconds.Command ModeGlobal Configuration mode
