Command Groups 137IPv6 Routingshow ip interface Displays all pertinent information about the IPinterface.PEshow ip policy Displays the route maps used for policy basedrouting on the router interfaces.PEshow ip protocols Displays the parameters and current state of theactive routing protocols.PEshow ip route Displays the routing table. PEshow ip route preferences Displays detailed information about the routepreferences.PEshow ip route summary Shows the number of all routes, including bestand non-best routes.PEshow ip traffic Displays IP statistical information. UE orPEshow ip vlan Displays the VLAN routing information for allVLANs with routing enabled.PEshow route-map Displays the route maps. PEshow routing heap summary Displays a summary of the memoryallocation from the routing heap.PEa. For the meaning of each Mode abbreviation, see Mode Types on page 87.Command Description Mode aclear ipv6 neighbors Clears all entries in the IPv6 neighbor tableor an entry on a specific interface.PEclear ipv6 statistics Clears IPv6 statistics for all interfaces or for aspecific interface, including loopback andtunnel interfaces.PEipv6 address Configures an IPv6 address on an interface(including tunnel and loopback interfaces).ICCommand Description Mode a
