System Management Commands 1675Telnet:If you need to utilize this device or otherwise make changes to theconfiguration, you may contact Kevin at x911.Press 'y' to continue (within 30 seconds) (y/n) yPlease, be advised this unit is under test by Kevin.User:rootPassword:******Welcome to the N3024 in the Bottom Chassis - 192.168.12.190. This unit islocated in A2 and is currently under test.N3024-C1>Exampleconsole(config)# banner motd “There is a power shutdown at 23:00hrs today,duration 1 hr 30 minutes.”console(config)# banner motd acknowledgeWhen the MOTD banner is executed, the following displays:IMPORTANT: There is a power shutdown at 23:00hrs today, duration 1 hr 30minutes.Press ‘y’ to continueIf ‘y’ is entered, the following displays:console >If ‘n’ is entered, the session will get disconnected, unless it is a serialconnection.clear checkpoint statisticsUse the clear checkpoint statistics command to clear the statistics for thecheckpointing process.Syntaxclear checkpoint statisticsDefault ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode
