1712 System Management Commands7 Dell 10GBase-T Cardshow supported switchtypeUse the show supported switchtype command in User EXEC mode to displayinformation about all supported switch types.Syntaxshow supported switchtype [switchindex]•switchindex — Specifies the index into the database of the supportedswitch types, indicating the type of the switch being preconfigured. Theswitch index is a 32-bit integer. (Range: 0–65535)Default ConfigurationThis command has no default configuration.Command ModeUser EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThe switch SID is used when preconfiguring switches in a stack using themember command in config-stack mode.The following table describes the fields in the first example.Field DescriptionSwitch Index (SID) This field displays the index into the database ofsupported switch types. This index is used whenpreconfiguring a member to be added to thestack.Model Identifier This field displays the model identifier for thesupported switch type.Management Preference This field indicates the management preferencevalue of the switch type.Code Version This field displays the code load target identifierof the switch type.
