Priority Flow Control Commands 913Command ModePrivileged EXEC modeUser GuidelinesThis command has no user guidelines.Example #1console#clear priority-flow-control statistics tengigabitethernet 1/0/1Example #2console#clear priority-flow-control statisticsshow interfaces priority-flow-controlUse the show interfaces priority-flow-control command in Privileged EXECmode to display the global or interface priority flow control status andstatistics.Syntaxshow interfacesinterface-id priority-flow-control•interface-id—A valid Ethernet port identifier.Command ModePrivileged EXEC, Configuration mode and all Configuration submodesUser GuidelinesNOTE: This command is only available on N40xx series switches.This command has no user guidelines.ExamplesThe following examples show the priority flow control status and statistics.s1#show interfaces tengigabitethernet 1/0/1 priority-flow-controlInterface Detail:te1/0/1PFC Configured State: DisabledPFC Operational State: EnabledConfigured Drop Priorities: 2-7
