426 Ethernet CFM CommandsDefault ConfigurationThis command has no default configuration.Command ModePrivileged EXEC, Configuration mode and all Configuration submodesUser GuidelinesThis command has no user guidelines.Exampleshow ethernet cfm maintenance-points local level 1---- ----- ---- ---- ------ ----- -------- ------ ----------- -----MPID Level Type VLAN Port Dire- CC MEP- Operational MACction Transmit Active Status---- ----- ---- ---- ------ ----- -------- ------ ----------- -----1 1 MEP 10 1/0/1 UP Enabled True 00:02:bc:02:02:02----- ---- ------ -----------------Level Type Port MAC----- ---- ------ -----------------show ethernet cfm maintenance-points remoteUse the show ethernet cfm maintenance-points remote command inPrivileged EXEC mode to display the configured remote maintenance points.Syntaxshow ethernet cfm maintenance-points remote {level0-7 | domaindomain-name | detail [macmac-address | mepMEPId] [domaindomain-name |level0-7] [vlanvlan-id]}• domain—Name of the maintenance domain (an alphanumeric string ofup to 43 characters in length).• level—Maintenance association level•mac-addr— The destination MAC address for which the connectivity needs tobe verified. Either MEP ID or the MAC address option can be used.•vlan-id— A VLAN associated with the maintenance domain. Range: 1-4094.• mpid— The MEP ID from which the loopback message needs to betransmitted.
