VLAN Commands 807ExampleThe following example shows how to display all interfaces for Double VLANTunneling.console#show dvlan-tunnelInterfaces Enabled for DVLAN Tunneling......... 1/0/1show dvlan-tunnel interfaceUse the show dvlan-tunnel interface command in Privileged EXEC mode todisplay detailed information about Double VLAN Tunneling for the specifiedinterface or all interfaces.Syntaxshow dvlan-tunnel interface {gigabithethernet unit/slot/port |tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port| all}• all — Displays information for all interfaces.Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Configuration mode and all Configuration submodesUser GuidelinesThe following table describes the significant fields shown in the example.Field DescriptionMode This field specifies the administrative mode through whichDouble VLAN Tunneling can be enabled or disabled. The defaultvalue for this field isdisabled.Interface Interface Number.
