IPv6 MLD Snooping Commands 513User GuidelinesThis command has no user guidelines.Exampleconsole(config)#ipv6 mld snooping vlan 2 last-listener-query-interval 7ipv6 mld snooping vlan mcrtexpiretimeThe ipv6 mld snooping mcrtexpiretime command sets the Multicast RouterPresent Expiration time. The time is set for a particular interface or VLAN.This is the amount of time in seconds that a switch waits for a query to bereceived on an interface before the interface is removed from the list ofinterfaces with multicast routers attached. The range is 1 to 3600 seconds.Syntaxipv6 mld snooping vlanvlan-id mcrtexpiretimetimeno ipv6 mld snooping vlanvlan-id mcrtexpiretime•vlan-id — Specifies a valid VLAN ID.•time — Multicast router present expiration time in seconds. (Range:1–3600)Default ConfigurationThe default multicast router present expiration time is 300 seconds.Command ModeGlobal Configuration mode.User GuidelinesThis command has no user guidelinesExampleconsole(config)#ipv6 mld snooping vlan 2 mcrtrexpiretime 1500
