DHCPv6 Commands 961no domain-namedomain•domain — DHCPv6 domain name. (Range: 1–255 characters)Default ConfigurationThis command has no default configuration.Command ModeIPv6 DHCP Pool Configuration modeUser GuidelinesDHCPv6 pool can have multiple number of domain names with maximum of8.ExampleThe following example sets the DNS domain name "test", which is providedto a DHCPv6 client by the DHCPv6 server.console(config)#ipv6 dhcp pool addrpoolconsole(config-dhcp6s-pool)#domain-name testconsole(config-dhcp6s-pool)#no domain-name testipv6 dhcp poolThis capability requires the IPv6 DHCP service to be enabled. Use the servicedhcpv6 command to enable the DHCPv6 service. Use the ipv6 dhcp poolcommand in Global Configuration mode to enter IPv6 DHCP PoolConfiguration mode. DHCPv6 pools are used to specify information forDHCPv6 server to distribute to DHCPv6 clients. These pools are sharedbetween multiple interfaces over which DHCPv6 server capabilities areconfigured.Syntaxipv6 dhcp poolpool-nameno ipv6 dhcp poolpool-name•pool-name — DHCPv6 pool name. (Range: 1-31 characters)
