1444 Clock Commandssntp unicast client enableUse the sntp unicast client enable command in Global Configuration modeto enable a client to use Simple Network Time Protocol (SNTP) predefinedUnicast clients. To disable an SNTP Unicast client, use the no form of thiscommand.Syntaxsntp unicast client enableno sntp unicast client enableDefault ConfigurationThe SNTP Unicast client is disabled.Command ModeGlobal Configuration modeUser GuidelinesUse the sntp server command to define SNTP servers.ExamplesThe following example enables the device to use Simple Network TimeProtocol (SNTP) to request and accept SNTP traffic from servers.console(config)# sntp unicast client enableclock timezone hours-offsetUse the clock timezone [ hours-offset ] [minutesminutes-offset] [zoneacronym] command to set the offset to Coordinated Universal Time (UTC).If the optional parameters are not specified, they will be read as either '0' or'\0, as appropriate.Syntaxclock timezone hours-offset [minutesminutes-offset] [zoneacronym]•hours-offset — Hours difference from UTC. (Range: –12 to +13)
