40.4.2 PDB trigger input source selectionThe PDB has up to 3 trigger input sources: software trigger, internal trigger, externaltrigger (via a pin). They are connected to on-chip or off-chip event sources. The PDB canbe triggered by software through SC[SWTRIG].For the trigger input sources implemented in this MCU, see chip configurationinformation.40.4.3 Pulse-Out'sPDB can generate pulse outputs of configurable width.• When the PDB counter reaches the value set in POyDLY[DLY1], then the Pulse-Outgoes high.• When the PDB counter reaches POyDLY[DLY2], then it goes low.POyDLY[DLY2] can be set either greater or less than POyDLY[DLY1].ADC pre-trigger/trigger outputs and Pulse-Out generation have the same time base,because they both share the PDB counter. The pulse-out connections implemented in thisMCU are described in the device's chip configuration details.Chapter 40 Programmable delay block (PDB)MWCT101xS Series Reference Manual, Rev. 3, 07/2019NXP Semiconductors 1113
