Operation Manual – VLANH3C S7500 Series Ethernet Switches Chapter 2 VLAN Configuration2-82.3.2 Associating a Port with the Protocol-Based VLANI. Configuration prerequisitesz The protocol template for the protocol-based VLAN is createdz The port is configured as a Hybrid port, and the port is configured to remove VLANtags when it forwards the packets of the protocol-based VLANs.II. Configuration procedureFollow these steps to associate a port with the protocol-based VLAN:To do… Use the command… RemarksEnter system view system-view —Enter port view interface interface-typeinterface-number RequiredAssociate a port with theprotocol-based VLANport hybrid protocol-vlan vlanvlan-id { protocol-index [ toprotocol-end ] | all }RequiredCaution:z For the operation of adding a port to the VLAN in the untag way, refer to the PortBasic Configuration part of this manual.z For the same VLAN, it is not allowed to configure the same protocol type andencapsulation format. Between different VLANs, the same protocol type andencapsulation format can be configured, but cannot be distributed to the same port.Even the user-defined template and standard template with the same encapsulationformat cannot be distributed to the same port.z If protocol has been distributed to a VLAN, the VLAN cannot be removed.z If a protocol of a VLAN has been distributed to a port, the port cannot be removedfrom the VLAN.z If a protocol of a VLAN has been distributed to a port, the protocol cannot beremoved from the VLAN.2.3.3 Associating a Card with the Protocol-Based VLANFollow these steps to create protocol-based VLAN on specific card:
