Operation Manual – FTP and TFTPH3C S7500 Series Ethernet Switches Chapter 1 FTP and TFTP Configuration1-8To do… Use the command… RemarksQuery a specified remote file ls [ remotefile ][ localfile ] OptionalDownload a remote file get remotefile[ localfile ] OptionalUpload a local file to the remoteFTP serverput localfile[ remotefile ] OptionalSwitch to another FTP user user username[ password ] OptionalEstablish a control connection tothe FTP serveropen { ip-address |server-name } [ port ] OptionalTerminate the current FTPconnection without exiting FTPclient viewdisconnect OptionalTerminate the current FTPconnection without exiting FTPclient viewclose OptionalTerminate the current FTPconnection and quit to user view quit OptionalTerminate the current FTPconnection and quit to user view bye OptionalDisplay the on-line help on aspecified FTP commandremotehelp[ protocol-command ] OptionalEnable debugging for the FTP debugging OptionalEnable the verbose function verboseOptionalThe verbose functionis enabled by default.1.1.5 Configuration Example: A Switch Functioning as an FTP ClientI. Network requirementsA switch functions as an FTP client and a remote PC functions as an FTP server.z Create a user account on the FTP server with the username “switch” andpassword “hello”, and grant the Read/Write authority on the directory named“switch” on the PC.z Configure the IP address 1.1.1.1 for a VLAN interface on the switch, and 2.2.2.2for the PC. Ensure that the switch and PC are reachable to each other.The switch application named switch.bin is stored on the PC. Download it to the switchthrough FTP to upgrade the switch application, and upload the switch configuration filenamed config.cfg to the switch directory of the PC to backup the configuration file.
