Operation Manual – Routing ProtocolH3C S7500 Series Ethernet Switches Chapter 8 Route Capacity Configuration8-2connection. If the automatic protocol connection recovery function is disabled, theswitch will not re-establish the disconnected IS-IS, BGP or OSPF connection evenwhen the free memory restores to a value larger than the safety value.8.2 Route Capacity ConfigurationRoute capacity configuration includes:z Setting the lower limit and the safety value of switch memoryz Enabling/disabling the switch to recover the disconnected routing protocolautomatically8.2.1 Setting the Lower Limit and the Safety Value of the Switch MemoryFollow these steps to set the lower limit and the safety value of switch memory:To do... Use the command... RemarksEnter system view system-view —Set the lower limit and thesafety value of switch memorymemory { safety safety-value |limit limit-value }* OptionalNote:The safety-value must be greater than the limit-value.8.2.2 Enabling/Disabling Automatic Protocol Connection RecoveryFollow these steps to enable/disable automatic protocol recovery:To do... Use the command... RemarksEnter system view system-view —Enable automatic protocolrecoverymemory auto-establishenableOptionalBy default, automaticprotocol connectionrecovery is enabled.Disable automaticprotocol connectionrecoverymemory auto-establishdisable Optional
