Operation Manual – Information CenterH3C S7500 Series Ethernet Switches Chapter 1 Information Center1-9To do... Use thecommand... RemarksEnable trap informationterminal display function terminal trappingOptionalBy default, trap informationterminal display is enabled forterminal users.1.2.3 Enabling Information Output to a Monitor TerminalFollow these steps to enable information output to a monitor terminal:To do... Use the command... RemarksEnter system view system-view —Enable theinformation center info-center enableOptionalBy default, the informationcenter is enabled.Enable informationoutput to Telnetterminal or dumbterminalinfo-center monitorchannel{ channel-number |channel-name }RequiredBy default, a switch outputslog/debugging/trap informationto user terminals throughinformation channel 1.Define aninformation sourceinfo-center source{ modu-name | default }channel{ channel-number |channel-name } [ { log |trap | debug } { levelseverity | state state } ]*RequiredSet the format oftime stampinfo-center timestamp{ log | trap | debugging }{ boot | date | none }OptionalThis command is used to setthe time stamp format forlog/debugging/trap informationoutput.This determines the time stampviewable to users.
