Operation Manual – NAT, Netstream, Policy RoutingH3C S7500 Series Ethernet Switches Chapter 3 Policy Routing Configuration3-2To do… Use the command… RemarksEnter system view system-view —Enter VLAN view vlan vlan-id —Redirectpacketsto aspecifiedVLANinterfacetraffic-redirect inbound ip-group{ acl-number | acl-name } [ rule rule[ system-index index ] ] interfacevlan-interface interface-number [ remark{ dscp dscp | { precedence precedence |tos tos}* } ] slot slot-numberRedirectinboundpacketsmatchingan ACLor ACLrule on anLPURedirectpacketsto aspecifiedIPaddresstraffic-redirect inbound ip-group{ acl-number | acl-name } [ rule rule[ system-index index ] ] next-hop ipaddr&1-3 [ remark { dscp dscp | { precedenceprecedence | tos tos}* } ] slot slot-numberRedirectpacketsto aspecifiedVLANinterfacetraffic-redirect outbound ip-group{ acl-number | acl-name } [ rule rule[ system-index index ] ] interfacevlan-interface interface-number [ remark{ dscp dscp | { precedence precedence |tos tos }*} ] slot slot-numberRedirectoutboundpacketsmatchingan ACLor ACLrule on anLPURedirectpacketsto aspecifiedIPaddresstraffic-redirect outbound ip-group{ acl-number | acl-name } [ rule rule[ system-index index ] ] next-hop ipaddr&1-3 [ remark { dscp dscp | { precedenceprecedence | tos tos } *} ] slot slot-numberPerformconfigurationas required.Note:Policy routing configurations only apply to packets that match permit ACL rules.Refer to related command manual for more information about these commands.3.3 Displaying Policy Routing ConfigurationTo do… Use the command… RemarksDisplay policy routingconfigurationdisplay qos-vlan[ vlan-id ] traffic-redirect Available in any viewRefer to related command manual for information about the display command.
