Operation Manual – AAA & RADIUS & HWTACACS & EADH3C S7500 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration1-381.5.7 Configuring the Timers of TACACS ServersTable 1-29 Configure the timers of TACACS serversTo do... Use the command... RemarksEnter system view system-view —Create a HWTACACSscheme and enter its viewhwtacacs schemehwtacacs-scheme-nameRequiredBy default, noHWTACACS schemeexists.Set the response timeouttime of TACACS serverstimer response-timeoutsecondsOptionalBy default, the responsetimeout time is fiveseconds.Set the wait time for theprimary server to restorethe active statetimer quiet minutesOptionalBy default, the primaryserver waits five minutesbefore restoring the activestate.Set the real-timeaccounting intervaltimerrealtime-accountingminutesOptionalBy default, the real-timeaccounting interval is 12minutes.Caution:z The setting of real-time accounting interval is indispensable to real-time accounting.After an interval value is set, the device transmits the accounting information ofonline users to the TACACS accounting server at intervals of this value. Even if theserver does not respond, the device does not disconnect the online user.z The interval must be a multiple of 3.z The setting of real-time accounting interval somewhat depends on the performanceof the device and the TACACS server: A shorter interval requires higher deviceperformance.1.6 Displaying and Maintaining AAA & RADIUS &HWTACACS InformationAfter the above configurations, you can execute the display commands in any view todisplay the operation information about AAA, RADIUS, and HWTACACS, so as toverify your configuration.
