Operation Manual – MulticastH3C S7500 Series Ethernet Switches Chapter 7 PIM Configuration7-19[H3C-Vlan-interface10] quit[H3C] interface Vlan-interface 11[H3C-Vlan-interface11] ip address 2.2.2.2 255.255.0.0[H3C-Vlan-interface11] pim dm[H3C-Vlan-interface11] quit[H3C] interface Vlan-interface 12[H3C-Vlan-interface12] ip address 3.3.3.3 255.255.0.0[H3C-Vlan-interface12] pim dm7.6.2 PIM-SM Configuration ExampleI. Network requirementsAll Ethernet switches are reachable for each other in the practical network.z LS_A is connected to LS_B through VLAN-interface 10, to Host A throughVLAN-interface 11 and to LS_C through VLAN-interface 12.z LS_B is connected to LS_A through VLAN-interface 10, to LS_C throughVLAN-interface 11 and to LS_D through VLAN-interface 12.z LS_C is connected to Host B through VLAN-interface 10, to LS_B throughVLAN-interface 11 and to LS_A through VLAN-interface 12.Host A is the receiver of the multicast group whose multicast IP address is 225.0.0.1.Host B begins to send data to the destination 225.0.0.1 and LS_A receives themulticast data from Host B through LS_B.II. Network diagramLS_DLS_BLS_CN11AN112VLAN10HostBLS_A VLAN 12VLAN10VLAVLVLAN10VLAN 1VLAN 12VLAN11HostAFigure 7-8 Network diagram for PIM-SM configuration
