Operation Manual – Information CenterH3C S7500 Series Ethernet Switches Chapter 1 Information Center1-13To do... Use the command... RemarksDefine aninformationsourceinfo-center source{ modu-name | default }channel{ channel-number |channel-name } [ { log |trap | debug } { levelseverity | state state } ]*RequiredSet the format oftime stampinfo-center timestamp{ log | trap |debugging } { boot |date | none }OptionalThis is to set the time stamp formatfor log/debugging/trap informationoutput.This determines the time stampviewable to users.Note:z To view debug information of specific modules, you need to set the information typeto debug in the info-center source command, and enable debugging oncorresponding modules using the debugging command as well.z To send information to remote SNMP workstation properly, related configurationsare required on both the switch and the SNMP workstation.1.3 Displaying and Maintaining Information CenterConfigurationTo do... Use the command... RemarksDisplay information on informationchanneldisplay channel[ channel-number |channel-name ]Display the operation status ofinformation center, the configurationof information channels, the format oftime stamp and the information outputin case of fabricdisplay info-centerDisplay the status of log buffer andthe information recorded in log bufferdisplay logbuffer [ levelseverity | size buffersize ]* [ |{ begin | exclude | include }regular-expression ]Display the summary informationrecorded in log bufferdisplay logbuffer summary[ level severity ]Display the status of trap buffer andthe information recorded in trap bufferdisplay trapbuffer [ sizebuffersize ]Availablein anyview
