Operation Manual – ClusterH3C S7500 Series Ethernet Switches Chapter 1 Cluster1-11To do… Use the command… RemarksConfigure the TFTP server for thecluster tftp-server ip-address OptionalConfigure the logging host for theclusterlogging-hostip-address OptionalConfigure the SNMP host for the cluster snmp-host ip-address Optional1.3 Member Device Configuration1.3.1 Member Device Configuration Task ListComplete the following tasks to configure a member device:Task RemarksEnabling NDP Globally and for Specific Ports RequiredEnabling NTDP Globally and for Specific Ports RequiredConfigure Member Devices to Access FTP/TFTP Server ofthe Cluster Required1.3.2 Enabling NDP Globally and for Specific PortsFollow these steps to enable NDP globally and for specific ports:To do… Use thecommand… RemarksEnter system view system-view —Enable NDP globally ndp enable RequiredIn system view ndp enableinterface port-listEnterEthernetport viewinterfaceinterface-typeinterface-numberEnableNDP forspecifiedportsInEthernetportview Enable NDPon the port ndp enableRequiredYou can choose toenable NDP in systemview or in Ethernet portview1.3.3 Enabling NTDP Globally and for Specific PortsFollow these steps to enable NTDP globally and for specific ports:
