Operation Manual – Routing ProtocolH3C S7500 Series Ethernet Switches Chapter 6 BGP Configuration6-13To do... Use thecommand... RemarksEnter system view system-view —Enter BGP view bgp as-number —Filter the received globalrouting informationfilter-policy{ acl-number |ip-prefixip-prefix-name }importRequiredBy default, the receivedrouting information is notfiltered.Specify a route filtering policyfor routes coming from apeer/peer grouppeer { group-name |ip-address }route-policypolicy-name importRequiredBy default, no route filteringpolicy is specified for apeer/peer group.Specify anACL-based BGProute filteringpolicy for apeer/peer grouppeer { group-name |ip-address }filter-policyacl-number importSpecify an ASpath ACL-basedBGP routefiltering policy fora peer/peergrouppeer { group-name |ip-address }as-path-aclacl-number importFilter theroutinginformationreceivedfrom apeer/peergroup Specify an IPprefix list-basedBGP routefiltering policy fora peer/peergrouppeer { group-name |ip-address }ip-prefixip-prefix-nameimportRequiredBy default, no ACL-basedBGP route filtering policy,AS path ACL-based BGProute filtering policy, or IPprefix list-based BGP routefiltering policy is configuredfor a peer/peer group.6.4.7 Configuring BGP-IGP Route SynchronizationFollow these steps to configure BGP-IGP route synchronization:To do... Use the command... RemarksEnter system view system-view —Enter BGP view bgp as-number —Disable BGP-IGP routesynchronization undo synchronizationRequiredBy default, BGP routesand IGP routes are notsynchronized.
