Operation Manual – Traffic AccountingH3C S7500 Series Ethernet Switches Chapter 1 Traffic Accounting Configuration1-3Note:This document describes the configuration of traffic accounting. The configuration of802.1x and CAMS server is not covered here.1.2.2 Configuring Traffic AccountingThe following table describes the configuration tasks for traffic accounting.Table 1-1 Configure the traffic accounting functionTo do... Use the command... RemarksEnter system view system-view —Configure the trafficaccounting slottraffic-accountingaccounting-slotslot-numRequiredz The specified trafficaccounting slot must be theslot where the trafficaccounting card resides.z You will enter trafficaccounting view directly afterthe configuration succeeds.z By default, no trafficaccounting slot is specified.Specify a trafficcollection card traffic-slot slot-num RequiredEnable the trafficaccounting function accounting enableRequiredBy default, this function isdisabled on the traffic accountingcard.Table 1-2 Configure traffic groupConfiguration Use the command... RemarksEnter system view system-view —Configure a traffic grouptraffic-accountingtraffic-groupgroup-nameRequiredEnter traffic group viewautomatically aftersuccessful configuration.Configure a networkaddress for the trafficgroupnetwork ip-address{ mask | mask-len }RequiredUse this command intraffic group view.
