Operation Manual – VRRP-HAH3C S7500 Series Ethernet Switches Chapter 1 VRRP Configuration1-7Task RemarksConfiguring a Virtual Router IP Address RequiredConfiguring Backup Group-Related Parameters Required1.2.2 Configuring a Virtual Router IP AddressThe following table lists the operations to configure a virtual router IP address (supposeyou have correctly configured the relation between the port and VLAN):Follow these steps to configure a virtual router IP address:To do… Use the command… RemarksEnter system view system-view —Configure that the virtualIP address can be pinged vrrp ping-enableOptionalBy default, the virtual IPaddress cannot bepinged.Map the virtual router IPaddress to a MACaddressvrrp method { real-mac |virtual-mac }OptionalBy default, the virtual IPaddress of a backupgroup is mapped to avirtual router IP address.Create a VLAN vlan vlan-id—This operation creates theVLAN to which the backupgroup corresponds. Thevlan-id argument is the IDof the VLAN.Return to system view quit —Enter VLAN interface view interface Vlan-interfacevlan-id —Configure a virtual routerIP addressvrrp vrid virtual-router-idvirtual-ip virtual-address Optional1.2.3 Configuring Backup Group-Related ParametersFollow these steps to configure backup group-related parameters:To do… Use the command… RemarksEnter system view system-view —Create a VLAN vlan vlan-id —Return to system view quit —
