Operation Manual – IP Address-IP Performance-IPXH3C S7500 Series Ethernet Switches Chapter 3 IPX Configuration3-12[H3C-Vlan-interface2] quit# Assign the network number 1000 to VLAN interface 1 and enable IPX on the VLANinterface.[H3C] interface Vlan-interface 1[H3C-Vlan-interface1] ipx network 1000# Configure a static route with the destination network number 3.[H3C-Vlan-interface1] quit[H3C] ipx route-static 3 1000.000f-e20f-0001 tick 7 hop 22) Configure Switch B.# Enable IPX.[H3C] ipx enable# Assign the network number 3 to VLAN interface 2 and enable IPX on the VLANinterface.[H3C] interface Vlan-interface 2[H3C-Vlan-interface2] ipx network 3# Set the packet encapsulation format to Ethernet_SNAP on VLAN interface 2.[H3C-Vlan-interface2] ipx encapsulation snap[H3C-Vlan-interface2] quit# Assign the network number 1000 to VLAN interface 1 and enable IPX on the VLANinterface.[H3C] interface Vlan-interface 1[H3C-Vlan-interface1] ipx network 1000# Configure a static route with the destination network number 2.[H3C-Vlan-interface1] quit[H3C] ipx route-static 2 1000.000f-e20f-0000 tick 7 hop 2# Configure a service information entry, indicating that Server can provide the fileservice.[H3C] ipx service 4 fileserver 2.0000-0c91-f61f 451 hop 2# Configure a service information entry, indicating that the server can provide theprinting service.[H3C] ipx service 7 printserver 2.0000-0c91-f61f 5 hop 23.5 Troubleshooting IPX ConfigurationI. Troubleshooting IPX forwardingSymptom 1: A destination address cannot be pinged through.Solutions:
