Operation Manual – Information CenterH3C S7500 Series Ethernet Switches Chapter 1 Information Center1-12To do... Use the command... RemarksEnableinformation outputto the trap bufferinfo-center trapbuffer[channel { channel-number |channel-name } | sizebuffersize]*OptionalBy default, the switch usesinformation channel 3 tooutput trap information to thetrap buffer, which can holdsup to 256 items by default.Define aninformationsourceinfo-center source{ modu-name | default }channel { channel-number |channel-name } [ { log | trap |debug } { level severity | statestate } ]*RequiredSet the format oftime stampinfo-center timestamp { log |trap | debugging } { boot |date | none }OptionalThis is to set the time stampformat forlog/debugging/trapinformation output.This determines the timestamp viewable to users.Note:To view debugging information of specific modules, you need to set the informationtype to debug in the info-center source command, and enable debugging oncorresponding modules using the debugging command as well.1.2.6 Enabling Information Output to the SNMPFollow these steps to enable information output to the SNMP:To do... Use the command... RemarksEnter system view system-view —Enable theinformation center info-center enableOptionalBy default, the information center isenabled.Enableinformation outputto the SNMPinfo-center snmpchannel{ channel-number |channel-name }RequiredBy default, the switch outputs trapinformation to SNMP throughchannel 5.
