Operation Manual – MAC Address TableH3C S7500 Series Ethernet Switches Chapter 1 MAC Address Table Management1-71.2.7 Setting the Processing Method for Specific PacketsFollow these steps to set the packet processing method of a switch when it receives apacket whose destination MAC address is the bridge MAC address of the switch:To do… Use the command… RemarksEnter system view system-view —Enable the switch to passthe packet whosedestination MAC address isthe bridge MAC address ofthe switch to the CPU forprocessingbridgemactocpuenableOptionalBy default, packets withthe destination MACaddress being the bridgeMAC address of theswitch are not passed tothe CPU for processing.Disable the switch frompassing the packet whosedestination MAC address isthe bridge MAC address ofthe switch to the CPU forprocessingbridgemactocpudisable Optional1.3 Displaying MAC Address ConfigurationTo do… Use the command… RemarksDisplay information about theMAC address tabledisplay mac-address[ display-option ]Display the aging time of thedynamic MAC address entriesin the MAC address tabledisplay mac-addressaging-timeAvailable in anyview.1.4 Configuration Example1.4.1 Network Requirementsz Log into the switch through the console port and enable address tableconfiguration.z Set the aging time of dynamic MAC address entries to 500 seconds.z Add a static MAC address entry 000f-e235-dc71 for port Ethernet 2/0/2 (assumingthat the port belongs to VLAN 1).1.4.2 Configuration Procedure# Enter system view. system-view
