Operation Manual – AAA & RADIUS & HWTACACS & EADH3C S7500 Series Ethernet SwitchesChapter 1 AAA & RADIUS & HWTACACSConfiguration1-35Caution:z The primary and secondary authorization servers cannot use the same IP address.Otherwise, the system will prompt unsuccessful configuration.z You can remove a server only when it is not being used by any active TCPconnection for sending authorization packets.1.5.4 Configuring HWTACACS Accounting ServersTable 1-26 Configure HWTACACS accounting serversTo do... Use the command... RemarksEnter system view system-view —Create a HWTACACSscheme and enter itsviewhwtacacs schemehwtacacs-scheme-nameRequiredBy default, no HWTACACSscheme exists.Set the IP address andport number of theprimary TACACSaccounting serverprimary accountingip-address [ port ]RequiredBy default, the IP address ofthe primary accountingserver is 0.0.0.0, and theport number is 0.Set the IP address andport number of thesecondary TACACSaccounting serversecondary accountingip-address [ port ]RequiredBy default, the IP address ofthe secondary accountingserver is 0.0.0.0, and theport number is 0.Enable thestop-accountingpackets retransmissionfunction and set themaximum number ofattemptsretry stop-accountingretry-timesOptionalBy default, thestop-accounting packetsretransmission function isenabled and the system cantransmit a stop-accountingrequest for 100 times.
