Operation Manual – DHCPH3C S7500 Series Ethernet Switches Chapter 2 DHCP Server Configuration2-11Follow these steps to configure to assign the IP addresses of interface address poolsto DHCP clients:To do… Use the command… RemarksEnter system view system-view —interface interface-typeinterface-numberdhcp select interfaceConfigurethe currentinterfacequitConfigure toassign the IPaddresses ofinterfaceaddress poolsto DHCP clients Configuremultipleinterfaces insystem viewdhcp select interface{ interface interface-typeinterface-number [ tointerface-typeinterface-number ] | all }RequiredBy default, a DHCPserver assigns theIP addresses of theglobal address poolto DHCP clients2.3.4 Configuring to Assign IP Addresses of DHCP Address Pools to DHCPClientsYou can assign IP addresses by static binding or assign IP addresses dynamically toDHCP clients as needed.I. Configuring to assign IP addresses by static bindingSome DHCP clients, such as WWW servers, need fixed IP addresses. This isachieved by binding IP addresses to the MAC addresses of these DHCP clients.When such a DHCP client applies for an IP address, the DHCP server finds the IPaddress corresponding to the MAC address of the DHCP client, and then assigns theIP address to the DHCP client.Follow these steps to configure to assign IP addresses by static binding:To do… Use the command… RemarksEnter system view system-view —Enter interface view interface interface-typeinterface-number —Configure static bindingdhcp server static-bindip-address ip-addressmac-addressmac-addressRequiredBy default, static bindingis not configured
