Operation Manual – Link AggregationH3C S7500 Series Ethernet Switches Chapter 1 Link Aggregation Configuration1-11To do… Use the command… RemarksEnter Ethernet port view interface interface-typeinterface-number —Enable LACP on the port lacp enableRequiredBy default, LACP isdisabled on a port.Configure the port priority lacp port-priorityport-priorityOptionalBy default, the port priorityis 32,768.Note:If you use the save command to save the current configuration and then restart thedevice, the configured manual/static aggregation groups and their descriptions stillexist, however, the dynamic aggregation groups will disappear and their descriptionscannot be restored.1.3 Displaying and Maintaining Link AggregationConfigurationTo do… Use the command… RemarksDisplay summaryinformation of allaggregation groupsdisplay link-aggregationsummaryAvailable in anyviewDisplay detailedinformation of a specificaggregation groupdisplay link-aggregation verboseagg-idAvailable in anyviewDisplay the ID of the localdevice display lacp system-id Available in anyviewDisplay link aggregationdetails of a specified portor port rangedisplay link-aggregationinterface interface-typeinterface-number | [ to{ interface-type interface-number ]Available in anyviewClear LACP statisticsabout a specified port orport rangereset lacp statistics [ interfaceinterface-type interface-number [ tointerface-type interface-number ] ]Available in userview
