Operation Manual – Routing ProtocolH3C S7500 Series Ethernet Switches Chapter 2 Static Route Configuration2-3Note:z If the destination IP address and the mask of a route are both 0.0.0.0, the route isthe default route. Any packet for which the router fails to find a matching entry inthe routing table will be forwarded through the default route.z Do not configure the next hop address of a static route as the IP address of aninterface on the local switch.z The preference can be configured differently to implement flexible routemanagement policy.2.3 Displaying the Routing TableTo do... Use the command... RemarksDisplay routing tablesummary display ip routing-tableDisplay routing tabledetails display ip routing-table verboseDisplay the detailedinformation of a specificroutedisplay ip routing-tableip-address [ mask ][ longer-match ] [ verbose ]Display the routes in aspecified address rangedisplay ip routing-tableip-address1 mask1 ip-address2mask2 [ verbose ]Display the routes fountafter specified ACLfilteringdisplay ip routing-table aclacl-number [ verbose ]Display the routes foundafter specified prefix listfilteringdisplay ip routing-table ip-prefixip-prefix-name [ verbose ]Display the routesdiscovered by a specifiedprotocoldisplay ip routing-table protocolprotocol [ inactive | verbose ]Display thetree-structured routingtable informationdisplay ip routing-table radixDisplay the statistics ofthe routing table display ip routing-table statisticsAvailable in anyview
