Operation Manual – ClusterH3C S7500 Series Ethernet Switches Chapter 1 Cluster1-12To do… Use the command… RemarksEnter system view system-view —Enable NTDP globally ntdp enable RequiredEnter Ethernet port view interface interface-typeinterface-number —Enable NTDP for the port ntdp enable Required1.3.4 Configure Member Devices to Access FTP/TFTP Server of the ClusterPerform the following configuration on a member device:To do… Use the command… RemarksAccess the public FTPserver of the cluster ftp cluster OptionalAvailable in user viewDownload files from thepublic TFTP server of theclustertftp cluster getsource-file[ destination-file ]OptionalAvailable in user viewUpload files to the publicTFTP server of the clustertftp cluster putsource-file[ destination-file ]OptionalAvailable in user view1.4 Intra-Cluster ConfigurationFollow these steps to configure a cluster:To do… Use the command… RemarksEnter system view system-view —Enter cluster view cluster —Add a candidate device toa clusteradd-member[ member-number ]mac-address H-H-H[ password password ]OptionalRemove a member devicefrom the clusterdelete-membermember-number OptionalReboot a specifiedmember devicereboot member{ member-number |mac-address H-H-H }[ eraseflash ]OptionalReturn to system view quit —Return to user view quit —
