Operation Manual – QoSH3C S7500 Series Ethernet Switches Chapter 1 QoS Configuration1-22[H3C-GigabitEthernet2/0/1] qos[H3C-qosb-GigabitEthernet2/0/1] traffic-limit inbound ip-group 2000 kbps 128exceed remark-dscp 561.8 Configuring RedirectRefer to Redirect for the introduction to redirect.1.8.1 Configuration Prerequisitesz ACL rules used for traffic identifying are defined. Refer to the ACL module in thismanual for defining ACL rules.z The port that the packets are to be redirected to is specified.z The ports that need this configuration are specified.1.8.2 Configuration ProcedureFollow these steps to configure redirect:To do… Use the command… RemarksEnter system view system-view —Enter Ethernet portviewinterface interface-typeinterface-number —Enter QoS view qos —Configure redirecttraffic-redirect inbound acl-rule[ system-index ] { cpu | interfaceinterface-type interface-number }RequiredDisplay theparameters for trafficredirectdisplay qos-interface[ interface-type interface-number ]traffic-redirectDisplay all the QoSsettings of the portdisplay qos-interface[ interface-type interface-number ]allOptionalYou can execute thedisplay command inany view.acl-rule: Applied ACL rules which can be the combination of various ACL rules. Theway of combination is described in Table 1-10.
