Operation Manual – Information CenterH3C S7500 Series Ethernet Switches Chapter 1 Information Center1-11To do... Use the command... RemarksEnter system view system-view —Enable theinformation center info-center enableOptionalBy default, the informationcenter is enabled.Enable informationoutput to the logbufferinfo-center logbuffer[ channel { channel-number |channel-name } | sizebuffersize ]* [ | excluderegular-expression ]OptionalBy default, the switchuses information channel4 to output log informationto the log buffer, whichcan holds up to 512 itemsby default.Define aninformation sourceinfo-center source{ modu-name | default }channel { channel-number |channel-name } [ { log | trap |debug } { level severity | statestate } ]*RequiredSet the format oftime stampinfo-center timestamp { log |trap | debugging } { boot |date | none }OptionalThis is to set the timestamp format forlog/debugging/trapinformation output.This determines the timestamp viewable to users.Note:To view debugging information of specific modules, you need to set the informationtype to debug in the info-center source command, and enable debugging oncorresponding modules using the debugging command as well.1.2.5 Enabling Information Output to the Trap BufferFollow these steps to enable information output to the trap buffer:To do... Use the command... RemarksEnter system view system-view —Enable theinformation center info-center enableOptionalBy default, the informationcenter is enabled.
