Operation Manual – FTP and TFTPH3C S7500 Series Ethernet Switches Chapter 1 FTP and TFTP Configuration1-12To do… Use the command… RemarksDownload a file throughTFTPtftp { cluster | tftp-server } getsource-file [ dest-file ] OptionalUpload a file throughTFTPtftp { cluster | tftp-server } putsource-file [ dest-file ] OptionalEnter system view system-view —Specify the ACL adoptedwhen a switch attempts toconnect a TFTP servertftp-server acl acl-number Optional1.2.3 TFTP Configuration ExampleI. Network requirementsA switch functions as a TFTP client and a PC functions as a TFTP server.z The TFTP work directory is configured on the TFTP server.z The IP address of a VLAN interface on the switch is 1.1.1.1. The port throughwhich the switch connects with the PC belongs to the VLAN. The IP address of thePC is 1.1.1.2.The application named switch.bin is stored on the PC. Download it to the switchthrough TFTP, and upload the configuration file named config.cfg to the work directoryon the PC to backup the configuration file.II. Network diagramSwitch PCNetworkSwitchSwitch PCnNetworkFigure 1-5 Network diagram for TFTP configuratioIII. Configuration procedure1) Start the TFTP server and configure the work directory on the PC.2) Configure the switch.# Log into the switch. (You can log into a switch through the Console port or by Telnet.Refer to the “Login” part of this manual for detailed information.)
