Operation Manual – QoSH3C S7500 Series Ethernet Switches Chapter 1 QoS Configuration1-28To do… Use the command… RemarksEnter system view system-view —Enter Ethernet portviewinterfaceinterface-typeinterface-number—Enter QoS view qos —reset traffic-statistic{ inbound |outbound } acl-rule[ system-index ]RequiredType-A LPUs support thiscommand.Clear the statistics ofthe traffic matching thespecified ACL rules reset traffic-statisticinbound acl-rule[ system-index ]RequiredNon-type-A LPUs support thiscommand.acl-rule: Applied ACL rules which can be the combination of various ACL rules. Type-ALPUs’ way of combination is described in Table 1-9, and non-type-A LPUs’ way ofcombination is described in Table 1-10.1.11.4 Configuration Examplez A switch is connected to 10.1.1.1/24 network segment through its Ethernet 2/0/1port.z Collect statistics on traffic from the 10.1.1.1/24 network segmentConfiguration procedure: system-view[H3C] acl number 2000[H3C-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255[H3C-acl-basic-2000] quit[H3C] interface Ethernet2/0/1[H3C-Ethernet2/0/1] qos[H3C-qoss-Ethernet2/0/1] traffic-statistic inbound ip-group 20001.12 Configuring Guaranteed BandwidthThe guaranteed bandwidth feature is to provide the maximum available bandwidth andminimum guaranteed bandwidth for the specified traffic to get the correspondingservice.1.12.1 Configuration Prerequisitesz ACL rules used for traffic identifying are defined. Refer to the ACL module in thismanual for defining ACL rules.z The parameters for the guaranteed bandwidth are specified.
